Archives
|
Product |
Kin. Viscosity cSt at 40 °C |
Pour Point °C, Max. |
Flash Point COC, °C Min. |
Description / Application |
|
Servofriz S 22 Servofriz S 32 Servofriz S 46 Servofriz S 57 Servofriz S 68 Servofriz S 100 Servofriz S 150 |
20 – 24 29 – 35 42 – 50 54 – 60 62 – 74 90 – 110 135 – 165 |
(-) 45 (-) 30 (-) 27 (-) 24 (-) 24 (-) 24 (-) 24 |
144 154 160 164 170 200 225 |
Servofriz S oils are premium lubricants having low pour point and meet the lubrication requirement of reciprocating and rotary refrigeration compressors. Servofriz S oils are recommended for use with all fluorocarbon refrigerants and with hydrocarbons and ammonia in refrigeration and air conditioning applications where the evaporation temperatures are lower than the pour point of the oil.
|
| Product | Kin. Viscosity cSt at 40 °C | Pour Point °C, Max. | Flash Point COC, °C Min. | Description / Application |
| Servofriz 12Servofriz 22
Servofriz 32 Servofriz 46 Servofriz 68 Servofriz 100
|
11 – 1320 – 24
29 – 35 42 – 50 62 – 74 90 – 110
|
(-) 39(-) 45
(-) 30 (-) 27 (-) 24 (-) 24
|
144150
158 164 174 200
|
Servofriz oils possess high fluidity at very low temperature, resist deposit formation and have reduced tendency to foam. These oils ensure high condenser efficiency and reduced compressor valve maintenance due to fewer deposits. These oils meet IS: 4578-1989 specification. Servofriz 68 also meets Carrier Corporation, U.S.A. specification PP 46-1. Servofriz oils are recommended for a wide range of refrigeration compressors using all conventional refrigerants (CFCs) except sulphur dioxide and are suitable for both reciprocating as well as rotary compressors. |
| Servofriz F 32Servofriz F 46
Servofriz F 57 |
33 – 3543 – 46
54 – 60 |
(-) 36(-) 27
(-) 24 |
158164
168 |
Servofriz F 32, F 46 and F 57, apart from having the characteristics of Servofriz oils have very low Freon Floc Points i.e. (-) 450C, (-) 400C and (-) 400C respectively. These oils are recommended for the lubrication of hermetically sealed refrigeration compressors. |
| Servofriz NH 32 | 29 – 35 | (-) 27 | 150 | Servofriz NH 32 contains a special additive to impart antiwear and rust protection characteristics and is recommended for cylinder lubrication of refrigeration compressors, with ammonia as refrigerant requiring a low pour anti-wear oil. |
| Servofriz NH 68 | 62 – 74 | (-) 24 | 170 | Servofriz NH 68 is a specially blended refrigeration compressor oil with ammonia as refrigerant for use in ice plants and cold storages. |
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
| Servotexstat LV 40
Servotex 2152
|
30 – 40 35 – 45 |
7.9 – 9.0 (PH value) 8.0 – 9.5 (PH value) |
Servotexstat LV 40 and Servotex 2152 are antistatic spin finish oils based on unique chemistries of antistatic agents and essential constituents of lubricating oils. They lower friction between metal and yarn and impart — desired lubricity with antistatic protection to various kinds of fibres during yarn manufacturing, excellent wetting properties, reduced volatility, excellent water dispensability resulting in stain-free finished yarns / fabric. These oils are used separately or in combination depending on the type of fibres being processed. |
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Pour Point °C, Max. |
Flash Point COC, °C, Min. |
Description / Application |
|
Servosynco 270 |
260 – 280 |
200 |
(-) 3 |
220 |
Servosynco 270 is a PAG based synthetic compressor oil having high viscosity index and natural anti-wear properties. Servosynco 270 is intended to be used in once through lubrication of cylinders of compressors handling petrochemicals such as polyethylene with operating pressure of 4000 bar in the hyper stage compressor. |
|
Servosynco E 32 Servosynco E 46 Servosynco E 68 Servosynco E 100 Servosynco E 150 |
29 – 35 42 – 50 62 – 74 90 – 110 135 – 165
|
130 142 150 153 158 |
(-) 42 (-) 45 (-) 42 (-) 39 (-) 30
|
210 210 210 210 210 |
Servosynco E oils are specially designed PAO based synthetic, long drain compressor oils for high pressures air compressors. They provide excellent lubricity and low oil consumption rate. Due to lower pour point, these oils offer scope for use at lower ambient temperatures with easy startability. Moreover, due to higher flash point and auto ignition temperature compared with conventional petroleum oils, Servosynco E Oils enhance safety factor.
|
|
Servosynco DE 32 Servosynco DE 68 Servosynco DE 100 Servosynco DE 150 |
29 – 35 62 – 74 90 – 110 135 – 165
|
121 67 57 67 |
(-) 39 (-) 21 (-) 21 (-) 18 |
230 230 230 230 |
These are Diester based synthetic compressor oils, recommended for single and multi-stage air compressors and once through cylinder lubrication. These are particularly effective for continuous high temperature applications with discharge temperature upto 200°C with minimum deposit formulation. They have built-in detergency properties which results in longer lasting air compressor parts and reduced oil separator varnishing and sticking of air compressor valves. |
|
Servosynco PE 32 Servosynco PE 46 Servosynco PE 68 |
29 – 25 42 – 50 62 – 74 |
130 115 105
|
(-) 48 (-) 39 (-) 33 |
246 252 254 |
These are Polyol ester based fully synthetic compressor oils designed to lubricate reciprocating air compressors working under severe operating conditions, air discharge temperature exceeding 200°C and rotary compressors. These oils possess superior oxidation stability, reduced carbon deposits tendency, high flash point and low volatility.
|
|
Servosynco AN 32 Servosynco AN 46 Servosynco AN 68 Servosynco AN 100 |
29 – 25 42 – 50 62 – 74 90 – 110 |
130 140 145 150 |
(-) 42 (-) 42 (-) 39 (-) 36 |
220 220 230 230 |
Servosynco AN Oils are formulated by a synthetic blend of PAO and Alkylated Naphthalenes. These products provide improved thermal and oxidation stability compared to PAO based compressor oils. |
|
Servocryo SHC 32
|
29 – 35
|
130
|
(-) 54
|
220
|
Servocryo SHC 32 is fully synthetic compressor oil specially developed for application in aluminium industry have inherent high viscosity index, excellent low temperature fluidity and high thermal and oxidation stability. Provides excellent performance in applications such as billet casting in Aluminium Industry.
|
|
Servocress 68 Servocress 100 Servocress 150 Servocress 220
|
64 – 74 90 – 110 135 – 165 198 – 242 |
210 210 220 220 |
(-) 36 (-) 36 (-) 36 (-) 36 |
215 215 215 220 |
Servocress oils are fully synthetic compressor oils for lubrication of LPG & other hydrocarbon gas compressors working under sub-zero temperature. These oils possess high viscosity index and anti-wear properties. These products have special capability to resist dilution with hydrocarbon gases . |
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
|
Servopress 32 Servopress 46 Servopress 68 Servopress 100 Servopress 150 Servopress 220 Servopress 320
|
29 – 35 42 – 50 62 – 74 90 – 110 135 – 165 198 – 242 288 – 352 |
95 95 95 95 95 90 90 |
196 200 204 210 220 230 250 |
Servopress oils are specially developed compressor oils, formulated with superior hydro treated base stocks, to provide satisfactory lubrication under prolonged high temperature and load conditions. These oils meet the requirement of DIN 51506 VD-L group and ISO DlS-6521 specifications for air compressor oil. Servopress oils are excellent cylinder lubricants for high performance reciprocating and rotary air compressors and can be used up to 2200C air discharge temperature.
|
|
Servopress 100 RR Servopress 150 RR |
90 110 135 – 165 |
95 95 |
210 220 |
Servopress RR oils are specially formulated air compressor lubricants having superior thermal and oxidation stability, better water separation ability, and high load carrying capacity. They minimise carbon deposit and wear under prolonged high temperature and load conditions. They also provide extended oil service life and reduced oil consumption. Servopress 100 RR and 150 RR are recommended by RDSO for compressor lubrication in GM EMD Locos and expressor lubrication in ALCO locos respectively.
|
|
Servopress T 32 Servopress T 46 Servopress T 57 Servopress T 68 |
29 – 35 42 – 50 54 – 60 62 – 74
|
100 98 95 95 |
215 215 215 215 |
Servopress T oils are formulated with superior hydro treated base stocks and have good demulsibility property and low deposit and sludge forming tendency. Servopress T oils meet the specific requirement of ammonia oxidation and air blow test and are recommended for lubrication of ammonia and syn-gas centrifugal and screw type compressors.
|
|
Servopress C 100 Servopress C 220 |
90 – 110 198 – 242 |
90 90 |
192 222 |
Servopress C oils are compounded to give excellent resistance to washing action of water. These oils provide excellent protection against rust and corrosion and have good fluidity at low temperatures. Servopress C oils are recommended for cylinder lubrication of single and multi stage air compressors handling moist air. These oils form stable emulsion with water and provide excellent lubrication of cylinder liners, piston rings, valves etc. Servopress C oils are not recommended for crankcase lubrication.
|
|
Servopress LS 220 Servopress LS 320 Servopress LS 460 |
198 – 242 288 – 352 414 – 506
|
90 90 90 |
220 226 260 |
Servopress LS oils are specially developed low sulphur (0.25% wt. max.) oils for cylinder lubrication of high pressure syn-gas reciprocating compressors. These oils minimise wear of cylinder liners and rings and ensure long life of the catalyst.
|
|
Servopress SS 68 |
62 – 74 |
127 |
210 |
Servopress SS 68 is Semi-synthetic compressor oil consisting of PAO and superior quality mineral base oil and additives. The product exhibits superior high temperature performance characteristics and oxidation stability to that of conventional mineral base oil formulation.
|
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
|
Servosteel 220 Servosteel 257 Servosteel 320 Servosteel 381 Servosteel 460 Servosteel 521 Servosteel 680 |
198 – 242 250 – 280 288 – 352 370 – 400 414 – 506 500 – 550 612 – 748
|
90 90 90 90 90 90 85 |
230 232 250 262 262 280 240 |
Servosteel oils are premium quality bearing oils possessing superior oxidation and thermal stability. These oils separate from water quickly and have excellent film strength property to minimise wear in roll-neck bearings of steel mills. Servosteel oils meet requirements of Morgoil bearing lubricant specified by Morgan Construction Co., U.S.A. These oils fully meet performance requirements of IPSS: 1-09-001-81.
|
|
Servosteel 220 Plus Servosteel 257 Plus Servosteel 320 Plus
|
198 – 242 255 – 265 288 – 352
|
95 95 95
|
230 232 250
|
Servosteel Plus oils are superior quality Non-EP type steel mill bearing oils which provide outstanding water separation, good resistance to thermal degradation and oxidation and protection against rust and corrosion. They meet the advanced Morgan Specification requirement (of March 2002) and also IPSS: 1-09-001 -81.
|
|
Servosteel EP 100 Servosteel EP 150 Servosteel EP 220 Servosteel EP 381 Servosteel EP 460
|
90 – 110 135 – 165 198 – 242 370 – 400 414 – 506
|
95 90 90 90 90
|
220 230 230 230 262
|
Servosteel EP oils are premium quality, extreme pressure, bearing and circulating oils which have very good load bearing ability in addition to excellent demulsibility characteristics. Servosteel EP oils are recommended for use in no-twist-rod mills and also in applications where severe load conditions are encountered.
|
|
Servosteel EP 100 Plus Servosteel EP 150 Plus Servosteel EP 220 Plus
|
90 – 110 135 – 165 198 – 242
|
95 95 95
|
220 230 230
|
Servosteel EP Plus oils are heavy duty bearing and circulating oils developed specially for the lubrication of bearings and gear boxes of ‘Wire Rod’ Mills. Formulated with superior hydro treated base oils and ashless additives, these oils meet the Morgoil Advanced Lubricant new oil revision 2.1 March 2002 specification including dynamic demulsibility endurance tests requirement. Servosteel EP Plus Oils possess high oxidation stability, superior anti wear characteristics and provide good protection against rust and corrosion. |
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
|
Servofilm 5 Servofilm 10 Servofilm 12 Servofilm 32 Servofilm 46 Servofilm 68 Servofilm 81 Servofilm 100 Servofilm 121 Servofilm 150 Servofilm 176 Servofilm 220 Servofilm 257 Servofilm 320 Servofilm 460
|
4 – 6 9 – 11 9 – 13 29 – 35 42 – 50 62 – 74 76 – 86 90 – 110 118 – 124 135 – 165 170 – 182 198 – 242 250 – 280 288 – 352 414 – 506
|
– 95 95 95 95 95 90 90 90 90 90 90 90 90 90 |
125 150 160 194 194 204 204 216 220 230 230 230 232 232 240 |
Servofilm oils have good oxidation and thermal stability and excellent ability to separate from water and meet IPSS 1-09-001-81. They are non-corrosive and are recommended for oil film bearings in steel mills and in circulation systems, where an non-additive type oil is required to obtain higher demulsibility and air release characteristics.
|
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
|
Servochainlube FG 150 Servochainlube FG 220 |
135 – 165 200 – 240 |
149 151 |
230 230 |
Servochainlube Foodgrade Oils are specially designed, fully synthetic anti-wear chain oils for lubrication of drive and transport change in the food processing industry. Blended from selected synthetic fluids and additives, they are listed by National Sanitary Foundation (NSF), USA as category H1 Lubricant for use where there is potential of incidental food contact.
|
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
| Servochainlube S 135
Servochainlube S 220 |
130 – 145
198 – 242 |
105
100 |
290
300 |
Servochainlube S Oils are specially formulated synthetic product for lubrication of bearings, chains, slides and gears in industrial applications where air temperature often exceeds 260 deg C. They are suitable for use in ceramic paint, fiber glass plants, foundries steel mills, automotives plants, paper, rubber, textile industry etc. |
|
Product |
Kin. Viscosity cSt at 40 °C |
VI Min. |
Flash Point COC, °C Min. |
Description / Application |
|
Servomist Lube 220 Servomist Lube 460
|
210 – 230 425 – 500 |
90 90 |
232 232 |
Servomist Lubes are premium quality oil mist lubricants with excellent film strength, and thermal-oxidation stability characteristics. They are designed to exhibit good misting properties as required in oil mist lubricant systems for industrial gear applications.
|